Maxfind Max2 1000W x2 Dual Motor Electric Skateboard 23MPH Wireless Remote Controller
- Glass fiber & PP composite, only 6.5KG/14.3lbs: It has a strong quality, lighter and easier to lift with one hand. You will have an easy experience.
- Unibody with built-in electric components : Breaking through the traditional skateboarding is a very suitable travel tool.
- Max Speed & Battery Type: 36km/h(22.4mile/h) & 4.4Ah 36V 158.4WH It has a strong power, and will make you have a speed experience, feel the thrill of the limit. And can be fully charged within two hours.
- Powerful 1000W*2 in-wheel dual-driven motors: Original imported battery, and guaranteed battery life.
- Wheel Material: PU In order to make the skateboard more stable at the extreme speed, we used a hard PU
- IP65 dust-water-proof design & 35% incline rate: It is suitable for all kinds of flat roads, detours, water channels and ramps.
- Battery Charge Time & Cycle charging: 120 minutes & 800 times
- Max loading: 120KG/265lb
Free Shipping from USA & Germany to USA & Europe
USA- 10-25 days
Europe- 7-15 days
Energetic Power Strong Battery
The same type of battery is used for Tesla, using a nickel plate connection + integral mounting bracket. The use of skateboard batteries is very safe and stable. The BMS intelligent power management system cooperates with the counter-bias brake charging technology of the main control board to convert the kinetic energy of the brake into electrical energy and store it in the battery. After increasing the number of batteries to 20, the power life will stand out among the peers, running 28km at a time.
Excellent Performance Strong Power
The diameter of the direct-drive motor is increased to 90mm, and the imported magnetic steel sheet and pure copper coil are used for more than 1000w. The movement efficiency and torque are improved by more than 35% under the optimization of the new winding process. In order to improve the heat dissipation performance of the air convection cooling system as a whole, the engine is designed as a honeycomb (radial) heat dissipation aluminum sheet to increase the heat dissipation area and improve the heat dissipation effect.
A tribute to Cadillac, inspired by its diamond-cut design, the diamond-cut design can be seen from the side, the tail or the back. In order to create such a light and delicate body texture and edge, the MAX2 uses a high-strength synthetic composite material, the design elements of the 31inch fuselage are retained to the maximum extent while effectively reducing weight.
FOC Dual Mode: Sine wave processor
The savvy brain of MAX2 comes from a deeply developed dual-mode drive permanent-magnet synchronous 32-bit microprocessor core. Using the FOC sine wave drive architecture ESC and power system, the motor control transition is smoother, and the overall efficiency of the motor ESC is increased by 30%. The (EBS) kinetic energy recovery function, through the motor power storage and reuse, increases the skateboard cruising range flexible electromagnetic brake function (EBS), comes with Hall error correction and repair function, and achieves the same comfort and safety as the car ABS brake.
The main board and battery are completely installed into the integrated diamond board, and the motor is completely enclosed in the rear wheel. This design provides up to IP65 dust and water protection for the entire vehicle.
Wireless Remote Controller
The remote control is ergonomically designed for a comfortable grip. A new generation of enhanced wireless technology, support 2.4/5.8GHz FM dual-band, communication without blind spots. Switch between speed and direction for more skateboarding fun. Exclusively develops cruise control and enjoys the black technology of the Cadillac sports car.
Designed in collaboration with Spanish designers, the AISIMg5 material for automotive trains is molded in a high-pressure casting mold to increase the compactness of the product and the sand hole ratio is less than 0.5%. The impact resistance of the product is at least 3 times that of the ordinary bracket. The special black yarn spraying process of scratch-resistant, with a deep black, interpretation of the noble and low-key noble quality.
New Generation of Rubber Anti-slip Sandpaper
We have experienced hundreds of material formula trials, overcoming the technical difficulty far beyond the past, exiting a non-slip mat that is different from traditional emery and using PVC and PEA synthetic materials, making anti-skid lines through the embossing roller process, and then hitting Color design production. Under the anti-slip effect, it can prevent scratches and scratches. Behind every ingenuity is a technological breakthrough that is unique.
I am rather happy in general there is just the flexibility of the rubber which is a little rigid. When the road is in bad condition it’s really not at all nice but otherwise on smooth road it’s at the top.