The original fender for below models (both front wheel and rear wheel)
But also been used as an universal mudguard fender, it can be equipped on many other electronic scooters, including 10-inch models or even 8-inch and 9-inch models, but we didn’t recommend you install it on 8/9 inch models, it’s not beautiful and without rainproof effect.
- important factor is to check the swing arm or front forks shape of your scooter. For example DUALTRON series is unsupported because of swing arms protuberance, OXO/OX is unsupported because of its single swing arm, VSETT 9 is unsupported because of the block of motor cable.
- Important factor is the size of bracket’s hole for crossing motor’s axle, you must make sure the motor’s axle can insert the hole. The hole of bracket is an irregular shape, part of which is circle(Distance: 11.82mm) and part of which is square(Distance:9.79mm), so you can’t adjust the position of the fender unless you refit the shape of the hole with some tools. You have to do this work by yourself.
IMPORTANT! If your scooter is not a 10-inch model, and you’re not handy if need to adjust it for perfect fit, I strongly suggest you don’t purchase it
Main Material: Fender: ABS, Bracket: Steel
Weight: Around 180g
Parameter of Fender: 190*90mm(L*W)
Distance from hole to hole: 150mm
Height from bottom to top: 160mm
Real customer reviews